mods-lj, modm-lj series mods?lj?8p8c?h?01?s3 modm?lj?02?8p8c?h?s3?g?g www.samtec.com mods plating no. of ports led 1 led 2 option lj for complete speci cations and recommended pcb layouts see www.samtec.com?mods-lj or www.samtec.com?modm-lj insulator material: black lcp contact material: becu shield material: brass operating temp range: -55? to +90? current rating: 1.5 a per contact voltage rating: 120 vac max contact resistance: 20 m max minimum cycles: 500 per contact array (ljrs) system applications: cat3, cat5, cat5e rohs compliant: ye s lead?free solderable: ye s packaging: packaged and shipped in bulk packaging trays; trays suitable for automation are available upon request. 8p8c s3 applications serial in-line pinout (gold) easily insert contact array easily remove contact array solder housing to pcb f-210 ?01 = one port ?h = 30" (0,76m) gold on contact assembly, tin on shield (see ljrs series for replacement contact assemblies) (leave blank for no alignment pin) ?a = alignment pin (14,11) .556 (15,75) .620 led 1 led 2 (7,87) .310 (3,56) .140 (1,38) .055 (19,56) .770 (16,92) .666 (16,71) .658 (17,81) .701 specifications field replaceable mod jacks ?g = green ?y = yellow ?1* = green/orange ?2* =yellow/orange ?3* =green/red ?4* =yellow/red ?5* =green/yellow ?6* = yellow/green (leave blank for no led) (callouts required for both led options) * voltage forward/reverse modm plating no. of ports led 1 led 2 option lj 8p8c s3 ?02 = two ports ?04 = four ports ?h = 30" (0,76m) gold on contact assembly, nickel on shield (see ljrs series for replacement contact assemblies) (leave blank for no alignment pin) ?a = alignment pin a (33,27) 1.310 (66,04) 2.600 no. of ports ?02 ?04 led 2 led 1 a (8,64) .340 (1,78) .070 dia (13,54) .533 (15,62) .615 (17,81) .701 ?g = green ?y = yellow ?1* = green/orange ?2* =yellow/orange ?3* =green/red ?4* =yellow/red ?5* =green/yellow ?6* = yellow/green (leave blank for no led) (callouts required for both led options) * voltage forward/reverse signal contact array shown inserted. (customer assembly required after soldering shield with insulator to pcb) housing and contact array shipped separately. signal contact array shown inserted. (customer assembly required after soldering shield with insulator to pcb) housing and contact array shipped separately.
|
